SKIP TO PRICES
SEABOARD
FABRICATION GUIDELINES - CLICK HERE
CPGSeaboard™
is a high density polyethylene sheet formulated to meet the specific
requirements of marine and other outdoor environments. In addition, special
post-production treatment enhances its ability to withstand the effects of salt
water, moisture and direct sunlight. CPGSeaboard is manufactured
as a continuous extrusion. It is not press laminated. Thus, it is
unconditionally guaranteed not to delaminate during the service life of the
end-product.
Key
Benefits
- High degree of stability
- Inertness to marine
environments
- Good flexibility and toughness
- Good dielectric properties
- Excellent as a barrier against
water vapor penetration
- Ultraviolet (UV) stabilized to
resist direct sunlight degradation throughout
- UV stabilized CPGSeaboard
sheets meet FDA requirements for use in applications where they may come in
contact with food
- All sheets exhibit consistent
color and quality characteristics
|
Property |
Units |
Value(1) |
ASTM Method |
|
Density(3) |
g/cm3 |
.960 |
D 1505 |
| Melt
Index |
g/10 min. |
0.7 |
D1238 |
|
Hardness |
Shore D |
68 |
D 2240 |
|
Environmental Stress Crack |
hrs. |
25 |
D 1693 |
|
Resistance, F50 |
hrs. |
>500 |
D 2561 |
| Tensile Strength
@ Break |
psi |
4,400 |
D
638 |
| Elongation @
Break |
% |
>600 |
D
638 |
| Flexural Modulus |
psi |
220,000 |
D
790 |
| Tensile Impact |
ft-lb/in |
100 |
D
1822 |
| Low Temperature
Brittleness, F50 |
oC |
<-7.6 |
D
746 |
| Heat Deflection
Temperature@66psi |
oC |
78 |
D
648 |
| Vicat Softening
Point |
oC |
125 |
D
1525 |
|
CPGSeaboard Availability |
|
Color |
Finish |
Thickness |
Width |
Length |
| Polar
White |
Matte |
1/4" - 1" |
48"
or 54" |
96" |
| 48"
or 54" |
120" |
| Mercury
Gray |
Matte |
1/4" - 1" |
48"
or 54" |
96" |
| 48"
or 54" |
120" |
| Black |
Matte |
1/4" - 1" |
48"
or 54" |
96" |
| 48"
or 54" |
120" |
| Sea Foam |
Matte |
1/4" - 1" |
48"
or 54" |
96" |
| 48"
or 54" |
120" |
| Sandshade |
Matte |
1/4" - 1" |
48"
or 54" |
96" |
| 48"
or 54" |
120" |
CPGSeaboard™ meets all of the
requirements of the Food and Drug Administration regulation 21 CFR 177.1520 for
articles intended for use in direct contact with foodstuffs. CPGSeaboard™
is ultraviolet stabilized.
Warranty
All sheeting guaranteed
void-free, the limit of our warranty is your money refunded or defective
material replaced; no other warranties are expressed or implied.
Physical properties of plastic sheeting are represented as "Typical."
Information contained herein is considered accurate to the best of our
knowledge. It is offered for your consideration and investigation, and is not to
be construed as a representation or warranty expressed or implied. Our
warranties are limited to those expressly stated in formal contracts or in
conditions of sale on our invoices and order acceptances. Conditions and methods
of use may vary and are beyond the control of
San Diego Plastics,
therefore, San Diego Plastics
disclaims any liability incurred as a result of the use of this product in
accordance with the data contained in our physical property charts. No
information herein shall be construed as an offer of indemnity for infringement
or as a recommendation to use the products in such a manner as to infringe any
patent, domestic or foreign.
1 The "Typical" properties of our plastic sheet cannot be
automatically used when engineering finished components; and the fabricator or
end user is responsible for insuring the suitability of our products for their
specific application or end use!
CPG SeaBoard Prices
Price per 54" x 96"
| Gauge |
Weight |
1 - 999 lbs. |
1,000 lbs |
| Price |
Price |
| 1/4" |
45 |
$96.00 |
$CALL |
| 3/8" |
67.5 |
$144.00 |
$CALL |
| 1/2" |
90 |
$192.00 |
$CALL |
| 3/4" |
135 |
$288.00 |
$CALL |
| 1" |
180 |
$384.00 |
$CALL |
Sales Terms
