|
Sanatec®
is a high density
polyethylene specially formulated for the manufacture of quality cutting boards.
Sanatec's special surface finish insures long product life and will not dull
knives. Sanatec outlasts (up to three times longer) functionally competitive
materials and is considered the strongest and lightest of all cutting board
materials.
Key Benefits
-
Acid resistant
-
Will not chip, peel,
crack or warp
-
No moisture, odor or
bacteria absorbent
-
Nonporous
-
Easy to clean
-
Dishwasher safe
-
Meets FDA and
Federal Specifications
-
Approved by National
Sanitation Foundation
-
Accepted by U.S. and
Canadian Departments of Agriculture
-
International
approval*
 Sanatec®
resin is in compliance with the "Commission Directive 90/128/EEC of February
23,1990, relating to plastic materials and articles intended to come into
contact with foodstuffs, annex II section A."
|
Property |
Units |
Value |
ASTM Method |
|
ASTM Type, Class, Category |
-- |
IV,A,4 |
D 1248 |
|
Melt Index |
g/10 min. |
0.70 |
D 1238 |
|
Density |
g.cm3 |
.960 |
D 1505 |
|
Environmental Stress Crack
Resistance, F50 |
hrs.
hrs. |
--
-- |
D 1693
D 2561 |
|
Hardness |
Shore D |
68 |
D 2240 |
|
Tensile Strength @ Break |
psi |
4,400 |
D 638 |
|
Elongation @ Break |
% |
>600 |
D 638 |
|
Flexural Modulus |
psi |
220,000 |
D 790 |
|
1% Secant Modules |
psi |
-- |
D 790 |
|
Tensile Impact, (2) |
ft-lb/in |
100 |
D 1822 |
|
Low Temperature Brittleness,
F50 |
oC |
<-7.6 |
D 746 |
|
Heat Deflection Temperature @
66 PSI |
oC |
78 |
D 648 |
|
Vicat Softening Point |
oC |
125 |
D 1525 |
|
Color |
Finish |
Thickness |
Width |
Length |
|
Natural |
Matte |
1/4" - 2" |
48" |
96" |
|
1/4" - 2" |
48" |
120" |
|
1/4" - 2" |
60" |
120" |
|
Black |
Matte |
1/4" - 2" |
48" |
96" |
|
1/4" - 2" |
48" |
120" |
|
1/4" - 2" |
60" |
120" |
Cutting Board HDPE Prices
Price per 48" x 96"
GAUGE
|
WEIGHT
|
1 TO 999 LBS
|
1000 LBS OR MORE
|
| 1/4" |
40 |
$128.90 |
$116.00 |
| 1/2" |
80 |
$257.80 |
$232.00 |
| 3/4" |
120 |
$386.70 |
$348.00 |
| 1" |
160 |
$533.30 |
$480.00 |
Prices subject to change without notice.
To order, call us at (800)925-4855
See Sales Terms
Sanatec®
meets the standard established by Food and Drug Regulation 21 CFR 177.52 for all
food contact, USDA, and the Department of Canadian Agriculture.
Warranty
All sheeting guaranteed void-free, the limit of our warranty is your money
refunded or defective material replaced; no other warranties are expressed or
implied.
1
Physical properties of plastic sheeting are represented as "Typical."
Information contained herein is considered accurate to the best of our
knowledge. It is offered for your consideration and investigation, and is not to
be construed as a representation or warranty expressed or implied. Our
warranties are limited to those expressly stated in formal contracts or in
conditions of sale on our invoices and order acceptances. Conditions and methods
of use may vary and are beyond the control of
Compression Polymers Corp.,
therefore, Compression Polymers
Corp. disclaims any liability
incurred as a result of the use of this product in accordance with the data
contained in our physical property charts. No information herein shall be
construed as an offer of indemnity for infringement or as a recommendation to
use the products in such a manner as to infringe any patent, domestic or
foreign.
The "Typical" properties of our plastic sheet cannot be automatically used
when engineering finished components; and the fabricator or end user is
responsible for insuring the suitability of our products for their specific
application or end use!
Call today for complete product information!
800/925-4855
619/477-4855
FAX 477-4874
SEND ME MORE CUTTING BOARD INFORMATION
|
